控制面板的維護和保養
Maintenance of control panel
控制面板維護的主要技術要點如下:
The main technical points of control panel maintenance are as follows:
(1)屏幕應保持清潔，不允許有灰塵和附著的水露。
(1) The screen shall be kept clean and free of dust and attached water dew.
(2)繼電器的關鍵點應定期檢查和更換，程控系統應定期檢查。
(2) The key points of the relay shall be checked and replaced regularly, and the program control system shall be checked regularly.
(3)電纜終端的卡尺應定期檢查，以確保緊密接觸和不生銹。
(3) The calipers of cable terminals shall be checked regularly to ensure close contact and no rust.
(4)維修工作結束后，電纜應排列整齊，分類清晰。
(4) After the maintenance, the cables shall be arranged neatly and classified clearly.
2、儀器維護和保養
2. Instrument maintenance
儀器維護的技術要點如下:
The technical points of instrument maintenance are as follows:
(1)所有零件清潔無銹蝕；表盤刻度清晰；銘牌、標志、密封完好；定期檢查和更換防潮劑。
(1) All parts shall be clean without rust; Clear dial scale; Nameplate, mark and seal are intact; Check and replace the moisture-proof agent regularly.
(2)使用酒精、清洗劑、超聲波等方法清洗零件，嚴禁使用對零件有害的清洗劑。
(2) Use alcohol, cleaning agent, ultrasonic and other methods to clean parts. It is strictly prohibited to use cleaning agents harmful to parts.
(3)儀器儀表中的所有元件、探頭、轉換器和計算器應定期檢修。
(3) All elements, probes, converters and calculators in instruments and meters shall be overhauled regularly.
(4)技術人員負責儀器儀表的維護。貴重儀器的維修應聯系維修部門或廠家處理，不得隨意拆卸。
(4) Professional technicians are responsible for the maintenance of instruments and meters. For the maintenance of valuable instruments, contact the professional maintenance department or manufacturer, and do not disassemble them at will.
(5)列入強制檢定范圍的儀器儀表應按時送技術監督部門檢定。
(5) Instruments and meters included in the scope of compulsory verification shall be submitted to the technical supervision department for verification on time.
(6)儀表箱和電控柜的接地、儲氣罐避雷針的接地電阻和接線應由持證電工定期檢查，防止接地接線斷線、誤接或電阻過大，在雷雨季節可能導致事故。
(6) The grounding of instrument box and electric control cabinet and the grounding resistance and wiring of lightning rod of air storage tank shall be regularly checked by certified electrician to prevent disconnection, misconnection or excessive resistance of grounding wiring, which may lead to accidents in thunderstorm season.
(7)大型儀器應按工廠操作說明書的要求進行維修和保養。如有難以判斷的故障，應請廠家售后服務部門維修保養。
(7) Large instruments shall be repaired and maintained according to the requirements of the factory operation manual. If there is any fault that is difficult to judge, please ask the after-sales service department of the manufacturer for maintenance.
The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: biogas desulfurization http://www.mimi5.cn
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2022-01-18
